All prices are displayed in Australian dollars and include GST.
How to assemble an Ergohuman chair
An Ergohuman chair arrives packed in a box to ensure you receive it in pristine condition. It takes approximately 15 mins for one person to assemble a chair. Everything you require is included and the instructions are available as a pdf or video as well as being attached to the chair.
It is important to follow the assembly instructions carefully to make sure all the bolts and parts are installed correctly. This ensures the function and safety of the chair will meet your expectations. Our assembly guides are available in multiple formats and are easy to follow. Don’t hesitate to get in touch if you need any assistance.
Assembling an Ergohuman chair
An Ergohuman chair is straight forward to assemble for one person and everything you need is included. The printed instructions are included in the box including a blister pack containing an Allen wrench with all the necessary bolts. This include 2 spare bolts to retain in case you need them in the future.
Assembly steps
Once you have unboxed your Ergohuman, it can be assembled in a matter of minutes. Watch the video below or download PDF instructions to get started. These are the main steps:
- Push and click the five castors into the 5-star base.
- Gently lower the gas lift into the 5-star base.
- Lower the seat onto the gas lift aligning it to the socket in the bottom of the seat base.
- Clip the backrest onto the back of the seat and insert the four bolts loosely at first, then tighten using the Allen wrench.
- Position the armrests on each side of the chair seating them in the socket of the lower arm. Install two bolts from underneath the lower arm and tighten using the Allen wrench.
tip: start all 4 bolts for the backrest and tighten them evenly. Make sure they are at the correct angle to tighten correctly. Note the blue thread locker will provide some resistance. This secures the bolt once tightened and prevents it working loose over time.
You deserve to be comfortable with an Ergohuman office chair
Assembling your Ergohuman chair is easy and takes bout 15 mins. Now you can experiment with the adjustments to customise the settings to your body and preferences. Please see the user guides here for the different models.
Maintenance of your Ergohuman office chair
Once a year it is good practice to check the back rest and arm rest bolts to make sure they are all tight and that none have worked loose. They are unlikelt to loosen but it can happen after a number of years of use.
Keep your chair clean by vacumning the dust from the mesh and frame ona regular basis. A full guide to cleaning and careing for your chair can be viewed here.
